供應XG-600-75L膠片冷卻機（切膠機）

 無

膠片冷卻機其速度隨主機（擠出機或開煉機）的出片速度自動或手動調整；速度為20 mt /min，變頻調速。

Speed is with the main machine (roll millor mixer) or adjusted by hand, speed is 40m/min, frequency adjust.

設備用途：膠片冷卻機與擠出壓片機或壓片機配套使用，用于將55L---110L型密煉機排下的膠料經壓片后進行浸涂隔離劑、冷卻吹干、疊（切）片存放。

Use scope: cooperator use with extruder, to cool, apply anti-tack and slice the batch from 55L ---110Lmixer.

具有接取、打印、縱裁、噴淋、浸涂隔離劑、提升掛片、步進風冷、出片擺片、切片等功能。

The system shall include all equipment required for conveying, marking, slitting, cooling, drying, applying anti-tack, and stacking mixed rubber slab stock. This will be complete form the slab open mill to the slab stacking devices.

懸掛式膠片冷卻裝置（掛膠冷卻輸送裝置）Swing type batch off including:

分段組裝式，斜坡下來的膠片在掛鏈架上一檔一檔儲存掛起，使膠片冷卻干燥。全封閉一側裝有冷卻用軸流風機，風機垂直面或傾斜3°-5°在一側吹風，快速把膠片上的隔離劑吹干。另一側裝有排氣通風口兩端各裝有一個檢查門，箱內裝有照明，受檢查門控制開關，箱底（鏈板上側）鋪有活動地板，便于維修。

Sectionalized type, batch hanged part by part in the hanger is easy to cool and dry. On the other side install fans enclosed, vertical angle of fan or incline angle is 3°-5°, which can dry the batch quickly. Opposite side install the exhaust intakes with two check door in both sides. It is for maintenance for the door is open by control and with light inside. 

聯系地址：江蘇省宜興市官林鎮東虹路18號 
聯系人：陳剛(銷售專線) 13861500568
銷售QQ號碼：393481256
手   機：13861500568
電話：+86-510-87205529-8017
傳真：+86-510-87207837
網址：
郵箱：cg13861500568@